Chicago Pneumatic FRL 1/2 BSP Instrucciones Del Producto página 19

Air Filter - Regulator - Lubricator
Shutting off the Pressure
This section describes how to shut off the pressure using the optional ball valve module:
1. Turn the knob (1) to 90° clockwise.
2. The pressure is shut off and the air is exhausted from the module.
Checking the system before start-up
WARNING Risk of Injury
The system is operating under pressure. Incorrect installation could damage the unit and cause serious injury.
Before start-up, check that all connections, ports, and modules have been correctly installed.
►
Before start-up:
• Check all connections for secure fit.
• Check all modules for proper assembly.
• Check the oil-mist lubricator (if existing) for sufficient oil and correct oil amount setting.
• Check the pressure regulator for correct setting.
• Check the filter module for properly equipped filters.
EN
© Chicago Pneumatic - 6159990240
Operation
19