Chicago Pneumatic FRL 1/2 BSP Instrucciones Del Producto página 13

Air Filter - Regulator - Lubricator
Inserting or Changing the Filter
WARNING Risk of Injury
Opening the system when under pressure could damage the unit and cause serious injury.
Ensure that the system is pressure free before opening the filter reservoir.
►
To insert or change the filter, the user must follow the below steps:
1. Pull the release (1) downward.
2. Turn the container (3) clockwise and remove it.
3. Rotate the filter end piece (4). The filter is free to remove.
4. Insert the new filter and screw the filter end piece (4) back into place.
5. Install the container (3) at 45° and turn counterclockwise until the release (2) engages.
EN
© Chicago Pneumatic - 6159990240
Operation
13