Idiomas disponibles
Idiomas disponibles
Skyview
Fault
Side track not vertical
Fabric rolls off sides of ends of roller
Blind stops in wrong position
Different blinds running at different speeds
Blind does not work
13
Warranty
Refer to the sections below for information about warranty and warranty support.
13.1
Australia and New Zealand
If the product does not work as it should, please contact your retailer or the
manufacturer's branch in your country (see dometic.com/dealer). The warranty
applicable to your product is 1 year(s).
For repair and warranty processing, please include the following documents when
you send in the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
• The number on the product label with details on the dimensions and material
specifications
EN
Solution
➤ Check if the side tracks are fitted perpen-
dicular to the roller and parallel to each
other.
➤ Check if the guide wires or side tracks are
perpendicular to the roller and that the
roller is horizontal.
➤ Refer to manual of your control device
(e.g. AP remote control).
➤ Refer to manual of your control device
(e.g., AP remote control).
➤ Check the power supply to the blind.
➤ Check the power supply to the blind.
Prolonged or repeated use can activate the
built-in thermal cut-out.
➤ Leave the motor to cool for 20 min and
try again.
If using an AP remote control:
➤ Refer to the AP remote control manual.
Warranty
17
