Beckman Coulter HHPC 6+ Manual Del Usuario página 20

HHPC 6+, HHPC 3+, HHPC 2+ USER MANUAL
Operation
7
Right click the DATA.tsv file (or the secure .xls file if enabled in the Communications Setup
screen) and select Open with > Excel. When the file is open, move the data to the computer.
NOTE
Each time data are saved to the USB memory stick, the DATA file on the memory stick is
overwritten.
Save data with an Ethernet connection
NOTE
This option is available only when the instrument is used with a charge cradle. The cradle is an optional
item for some instrument models
1
Connect the Ethernet cable and power cable to the instrument base.
2
Navigate to the Communication Setup menu and push the SELECT button.
3
In the Communication Setup screen, set the IP address, Subnet Mask, and Gateway address. To
do this, do one of the following:
a. Put the IP Address, Subnet and Gateway data in the appropriate fields OR
b. Select the DHCP check box.
If the DHCP box is selected, the IP Address, Subnet Mask and Gateway are set automatically
when the instrument is connected to the network.
The instrument will ask for an IP address if:
• the instrument is put in an Ethernet connected cradle.
• the instrument is in a cradle and a power cycle is done.
• the user exits from the communications screen after changes were made but the DHCP
4
Install the instrument in the cradle.
5
Open the Internet browser. In the Address bar, put one of the items that follow:
a. The IP address from the Communication Setup screen
b. hpc+ the instrument serial number. The serial number is in the instrument Diagnostic
screen.
Example: hpc123456789
20 / 26
(HHPC
box was still checked.
models).
DOC026.97.80271, Edition 9