Idiomas disponibles
Idiomas disponibles
ENGLISH
-
The mower will perform cutting cycles when fully charged until it detects a lack of battery
power.
-
The mower can begin in a second starting area, other than the charging station. If the
mower has the second starting area activated (ON), it will proceed to a second area from
which it will start after the first full discharge of the battery.
-
A number may appear momentarily on the display during the cutting task, this is due to the
remaining battery percentage of the mower.
Changing the PIN code
-
To change the PIN code, press and hold the
seconds. "PIN 1" will start flashing on the display, which means that you must enter the old
PIN. When "PIN 1" is displayed, the first number of the PIN will flash. Use the
buttons to select the number you wish, and press
number of your old PIN will flash. Repeat the process with the remaining numbers of your
old PIN. After that, you can enter a new PIN. In this example, the PIN we want to set is 1234.
When you have entered your old PIN, "PIN 2" will start flashing on the display and so will
the first number. Do the same to enter the new PIN code of your choice (in this example it
is 1234).
changed the PIN code.
-
If you do not remember the PIN code, contact the official Cecotec Technical Support Service.
Setting the mower's date
-
The year, month, day and time must be set, these are mandatory configuration items. If
you do not set these elements correctly, it will influence the working time. These elements
must be set in the order: year, month, day, and time.
-
To start the configuration, press and hold
and/or
to select the year. Then press
continue with setting the month and day in the same way, e.g. 08.25 would be 25 August.
-
In the meantime, the year will be displayed and then a number to indicate the date, e.g.
08.25 (25 August). Fig. 11
-
The time will then be shown on the display, e.g. 13:25. When it flashes, use
select the desired number and press
complete,
Changing the mower's time and programming the operating range
-
The mower's time must be set by pressing and holding the
mower to follow the programming correctly.
-
The default operating range is from 9:00 to 15:00, but you can change it. To do so, press and
hold the
and
mower to start operating at 13:25, when
select the desired time, press the
the display, and the mower will automatically start operating at 13:25. You will hear a beep
when you do so. Fig. 12
122
CONGA GRASSHOPPER 300
will then appear on the display, which means that you have successfully
will appear on the display. Fig. 11
buttons at the same time for 3 seconds. For instance, if you want the
and
to confirm the setting. Then, the next
for 3 seconds. For example, 2020. Use
to confirm and finish the configuration. Then
to confirm the setting. When the time setting is
flashes, use the
button to confirm the setting.
buttons at the same time for 3
button for 5 seconds for the
or
will appear on
or
or
to
buttons to
