Idiomas disponibles
Idiomas disponibles
-
Base fitting screws
-
Blades for replacement
-
Boundary wire
-
Boundary wire pegs
-
Power adapter
-
Distance guide
-
Instruction manual
Not included
-
Scissors and wire strippers
-
Hammer
-
Measuring tape
3. INSTALLATION
Initial check
-
Preparing the mower for proper use is simple. The process does not take long, though this
will depend on the size of your garden.
-
This mower is designed to mow on a regular basis, allowing you to keep your garden neat
and tidy. In addition, you can programme the operating time to operate at any time and
without any limitation.
-
When using the mower in public places, the following notice must be displayed: Warning!
Automatic lawn mower! Stay away from the appliance! Keep an eye on children!
-
First, read this instruction manual carefully. Make a plan of the working area and include
all obstacles, so it will be easier to see where the charging station should be placed and
where the cables should be routed.
-
To mow the lawn for the first time, set the cutting height to the maximum level (50 mm).
Place the mower in the working area and run it for a while. Check that the boundary wire is
correctly positioned. Also check that the mower returns to the charging station by following
the boundary wire. If the mower returns to the charging station without difficulties, this
means you can use it normally.
Charging station installation. Figure 3
1. The charging station can be placed next to a tool shed or a house. When laying the
boundary wire, leave at least one metre of wire straight and unobstructed in front of the
charging station.
2. The charging station should be placed on a relatively flat surface. Do not place it on an
inclined surface and avoid bending the robot's support surface.
3. We recommend that the power supply unit is placed on a wall at a minimum height of 30
cm. The power cable must be outside the working area of the mower.
ENGLISH
CONGA GRASSHOPPER 300
119
