Idiomas disponibles
Idiomas disponibles
f ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g ) Use the power tool, accessories and tool bits, etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
h ) Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the tool
in unexpected situations.
5) Battery Tool Use and Care
a ) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with another
battery pack.
b ) Use power tools only with specifically designated
battery packs. Use of any other battery packs may create a
risk of injury and fire.
c ) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
d ) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause
irritation or burns.
e ) Do not use a battery pack or tool that is damaged
or modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk
of injury.
f ) Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 265 °F (130 °C) may cause explosion.
g ) Follow all charging instructions and do not charge
the battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the
battery and increase the risk of fire.
6) Service
a ) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
b ) Never service damaged battery packs. Service of
battery packs should only be performed by the manufacturer
or authorized service providers.
Lawn Trimmer and Lawn Edge Trimmer
Safety Warnings
a ) Do not use the machine in bad weather conditions,
especially when there is a risk of lightning. This decreases
the risk of being struck by lightning.
b ) Thoroughly inspect the area for wildlife where the
machine is to be used. Wildlife may be injured by the machine
during operation.
c ) Thoroughly inspect the area where the machine is
to be used and remove all stones, sticks, wires, bones,
and other foreign objects. Thrown objects can cause
personal injury.
d ) Before using the machine, always visually inspect
to see that the cutter and the cutter assembly are not
damaged. Damaged parts increase the risk of injury.
e ) Keep guards in place. Guards must be in working
order and be properly mounted. A guard that is loose,
damaged, or is not functioning correctly may result in
personal injury.
f ) Keep all cooling air inlets clear of debris. Blocked air
inlets and debris may result in overheating or risk of fire.
g ) Wear eye protection and ear protection. Adequate
protective equipment will reduce personal injury.
h ) While operating the machine, always wear non-slip
and protective footwear. Do not operate the machine
when barefoot or wearing open sandals. This reduces the
chance of injury to the feet from contact with the moving cutter.
i ) Always wear clothing such as trousers that covers the
operator's legs while operating the machine. Contact with
the moving cutter or line may cause injury.
j ) Keep bystanders away while operating the machine.
Thrown debris can result in serious personal injury.
k ) Do not operate the machine above waist height. This
helps prevent unintended cutter contact and enables better
control of the machine in unexpected situations.
l ) Exercise caution when operating the machine in wet
grass. Walk, never run. This reduces the risk of slipping and
falling which may result in personal injury.
m ) Do not operate the machine on excessively steep
slopes. This reduces the risk of loss of control, slipping and
falling which may result in personal injury.
n ) When working on slopes, always be sure of your
footing, always work across the face of slopes, never up
or down and exercise extreme caution when changing
direction. This reduces the risk of loss of control, slipping and
falling which may result in personal injury.
o ) Keep all power cords and cables away from cutting
area. Power cords or cables may be hidden in hedges or bushes
and can be accidentally cut or damaged by the line or cutter.
p ) Keep all parts of the body away from the moving
trimmer cutter or line. Do not clear material from the
machine until it has been disconnected from the power
source. The moving trimmer cutter or line may result in serious
personal injury.
q ) Carry the machine with the machine switched off
and away from your body. Proper handling of the machine
will reduce the likelihood of accidental contact with a moving
trimmer cutter or line.
r ) Only use replacement cutting heads and trimmer
cutters or lines specified by the manufacturer. Do not
replace the trimmer cutters or lines with metal wires or
blades. Incorrect replacement parts may cause loss of control,
breakage and injury.
English
7
