Belson BS-260 Manual Del Usuario página 40

Idiomas disponibles

Idiomas disponibles

PROBLEM RESOLUTION
PROBLEM
It does not turn on
It does not sound
there is no image
unit not
reply
screen not
reply
bad radio signal
the radio doesn't
sounds in
stereo
The command to
distance not
reply
Bluetooth off
works
gps not
reply
NOTE:After reading the table above and trying to solve the problems without success, consult
the technical support of the seller. Do not try to repair and disassemble the unit yourself.
SOLUTION
- Check that the connection cables are connected correctly.
- Check if the fuse has blown. Replace it if necessary.
- Check and make sure the speakers are well connected.
- Check that the video cables are well connected to the video device.
- Press the RESET button to start the unit in its default state.
- Press the RESET button to start the unit in its default state.
- Check if the antenna is inserted or well connected.
- The antenna may not be the proper length, check that it is extended.
- Check the ground connection of the antenna.
- Tunes the radio frequency more accurately.
- The received signal is weak, change the mode to MONO.
- Change the batteries with new ones.
- Point the infrared sensor of the remote to the receiver of the radio.
- Clean the remote control sensor.
- Check that the devices are paired correctly.
- Check if the browser SW has been installed correctly.
- Check if the GPS antenna has been connected correctly.
18
loading