Idiomas disponibles
Idiomas disponibles
• Upper and Lower Limit Function
After setting the upper and lower limit function, when you pull the control panel up to reach the set
upper limit, the desk will stop rising. When you push the control panel down to reach the set lower limit,
the desk will stop descending once limit is reached.
Method of setting: Press and hold the M key for 5 seconds. Enter the main menu. Toggle the control
panel to reach Upper and Lower Limit Function interface with
sponding submenu. Use the control panel to toggle up or down to the page. Once on page, select the
current position as the upper
to adjust the desk to the other preferred limit, re-enter the menu and repeat the process.
• Control Panel Lock Function
The control panel lock function is designed to prevent accidental adjustments of the desk height
through the control panel. Once the function is activated, the height of the standing desk cannot be
adjusted through the control panel, but only through the APP. The control panel can be used again for
adjustments after unlocking by following the steps below.
Method of setting: Press and hold the M button for 5 seconds to enter the main menu interface. Toggle
the control panel up and down to display the control panel lock interface
enter the corresponding submenu. Choose to turn on the control panel lock
When the control panel lock function is set successfully, the control panel will enter the lock mode after
10 seconds of inactivity. After pressing any button, the illustration
unlocking sequence in the illustration to return to the height display screen.
• Reset Function
After resetting the control pad any error message on the display screen will be cleared. Once reset, the
desk will be at the highest position due to reset instructions and will not return to its original height
unless manually done. All previous settings (memory positions, upper and lower limit, etc.) will not be
reset.
Method of setting: When an error occurs, please refer to the attachment of the manual for trouble-
shooting (Error Code Solutions). Then press the control pad downwards for 5 seconds, until the screen
displays
. Once
control panel. After releasing it, press the control panel downwards again to start the reset. During the
reset, the desk will rise to its highest position. After reaching the highest point, the reset is complete,
and the screen will display the value of the desk's highest/current position.
or lower
is shown, the desk is in a reset state. Once in the reset state, release the
, press the M key to enter the corre-
height limit. After setting a height limit, if you want
10
and press the M button to
or turn it off
.
appears. Follow the button
