Idiomas disponibles
Idiomas disponibles
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following instructions for
use carefully.
Use the product only as described and only
for the given areas of application. Store these
instructions for use carefully. When passing the
product on to third parties, please also hand
over all accompanying documents.
Scope of Delivery
1 x wicker sunlounger
2 x wheel
2 x screw (1)
2 x protection cap (2)
1 x allen key (3)
2 x shim (4)
2 x guide bearing (5)
1 x instructions for use
Intended Use
This article is not intended for commercial use.
The article is designed for use in the private
living area, e.g. balcony, terrace or garden.
Technical Data
Date of manufacture (month/year):
12/2020
Safety Instructions
Risk of Death!
• Never leave children with the packaging ma-
terial without supervision. Risk of suffocation.
Risk of Injury!
Risk of trapping fingers!
• Warning - Risk of crushing! To reposition the
product do not take hold of it by the front legs.
Beware of crush and shear points when un-
folding the product and when folding it up.
• Ensure that the rod (figure D) clicks into place
when you open the article!
• Ensure the correct stability has been achieved
before using the article.
• Place the article on a level surface.
• Ensure that the folding function is correctly
locked before using the article.
• Ensure that the article has been fully opened
before using the article.
• The article may only be used with adult super-
vision and may not be used as a toy.
• The article may only be used by one person
at a time.
• Check the article for damage or wear before
each use.
• Do not use the back or armrests as a seat.
• Do not use the article in the vicinity of an
open flame.
Avoid damage to property!
• Secure the article during extreme weather
conditions, e.g. in strong winds. Store the
article in a sheltered room.
Mounting the wheels (Fig. B)
Attach the wheels as shown in figure B.
1. Place the washers (4) on the screws (1).
2. Push the guide bearings (5) and the screws
together with the shims into the wheels and
tighten the screws with the Allen key (3).
Note: If the screws are fastened too tightly the
wheels may become blocked and the screws
can break off. The screws should be in place
securely but the wheels still must be able to turn.
3. Attach the cover caps (2) on the centre of the
wheels to cover the screws.
Use
When unfolding or moving the product make
sure that the front legs are folded out completely
(fig. C) as otherwise the product will not have
sufficient stability.
Storage
• When not in use, always store the product
clean and dry at room temperature.
• Please take note that the wood can alter its
characteristics because of changing tempera-
tures, humidity, and other factors.
GB/IE
9
