Idiomas disponibles
Idiomas disponibles
EN
Introduction
Thank you for purchasing this Silverline product. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even
if you are familiar with similar products, it is necessary to read this manual carefully to
ensure you fully understand the instructions. Ensure all users of the product read and fully
understand this manual. Keep these instructions with the product for future reference.
Description of Symbols
The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
WARNING: To reduce the risk of injury, user must read instruction manual
Caution!
DO NOT use with compressed gas cylinders!
Toxic fumes or gases!
Risk of fire!
Risk of explosion!
NO open flames!
NO smoking!
Conforms to relevant legislation and safety standards
Environmental Protection
Air tools should not be disposed of with household waste. They contain traces of
oil and other lubricants. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice.
8
Original Instructions
Technical Abbreviations Key
bar
Metric unit of pressure
psi
Pounds per square inch
L/min
Litres per minute
cfm
Cubic feet per minute
Specification
Maximum operating pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4bar (58psi)
Working pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0-4bar (0-58psi)
Air Inlet . . . . . . . . . . . . . . . . . . . . . . 1/4" BSP, supplied with two male airline quick connectors
Spray gun body material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Powder-coated cast aluminium
Paint container material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Aluminium
Paint container volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750ml
Type of feed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Suction
Nozzle diameter..................................... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5mm
Fluid output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130-210ml/min
Min. hose diameters . . . . . . . . . . . . . . . . . . . . 8mm (5/16") for supply hose length up to 15m
Air consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85-227L/min (3-8cfm)
Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.62kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
General Safety Warnings
WARNING: Failure to follow the warnings and instructions may result in damage to the tool or
serious injury.
Save all warnings and instructions for future reference.
WARNING: This tool is not intended for use by persons (including children) with reduced
physical or mental capabilities or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the tool by a person responsible for their safety.
Children must be supervised to ensure that they do not play with the appliance.
a) Familiarise yourself with the applications, limitations and hazards of the tool.
b) Keep the product in good working order and condition. Take immediate action to repair or
replace damaged parts.
c) Use recommended parts only. Unapproved parts may be dangerous and will invalidate the
warranty.
d) Use the tool only for its intended purpose.
e) Use appropriate safety equipment including eye protection, respiratory protection and protective
gloves.
f) Injury can occur if loose clothing, personal jewellery, neck wear, hair or gloves are not kept away
from the tool and its accessories.
g) Keep proper footing and balance at all times. If appropriate secure workpiece in a clamp or vice.
h) Ensure that the tool is disconnected from the air supply before servicing, changing accessories
and when not in use.
i) DO NOT allow smoking or open flames in the work area.
j) DO NOT modify the tool. Modifications can reduce the effectiveness of safety measures and
increase the risks to the user.
k) DO NOT tamper with or adjust safety valves or other safety features.
l) DO NOT use the tool or accessories if they have been damaged. Inspect tools and accessories
before each use. Do not use if damaged or excessively worn.
m) DO NOT use whilst tired or under the influence of drugs, alcohol or medication.
n) Compressed air can cause severe injury.
o) Whipping hoses can cause severe injury. Always check for damaged or loose hoses and fittings.
p) DO NOT direct air flow at yourself, others or animals.
q) DO NOT exceed the maximum air pressure stated on the tool.
r) Never carry an air tool by the hose.
(EN-6 'UK' and EQ-4 'EU' types)
9.5mm (3/8") for longer supply hoses
