WAGNER STEAMFORCE SPEED PRO Guia Del Usuario página 21

SteamForce Speed Pro
f) Children shall not play with the appliance. Risk of scalding or shock.
g) Never use the tool in hazardous areas that contain flammable
liquids, gases or dusts. Power tools generate sparks that can ignite
dust or vapours.
h) If the supply cord is damaged, it must be replaced by the
manufacturer or its service agents to avoid a safety hazard.
i) Never point the steamplate / bar at people, animals, at objects
sensitive to temperature or other electrical equipment. Do not
point liquid or steam directly at electrical devices or equipment
containing electrical components, such as the interior of ovens.
j) The device must not be used if it has been dropped, if obvious
damage is visible or if it is leaking.
k) Whenever accessories are replaced, during maintenance, when
filling / refilling or draining, and whenever the steam device is not
in use (including breaks between work), the plug on the mains
cable must be removed from the socket.
4. Safety Instructions for Steam Wallpaper Strippers
! !
When working with hot steam (min.100°C), there is a risk of
ATTENTION
serious scalding. Hot steam and boiling water can emit when
the safety valve (fig. 1)is activated due to overpressure in
incorrect operation of the unit.
Only change position during use, with care. The steam unit,
hose and steamplate can be very hot. Always wear suitable
protective clothing / gloves.
Operate the unit only with pure water without agents or additives. Do not
switch the unit on when empty.
Always ensure that the unit is standing securely in a horizontal position
(on the floor). (Fig. 2)
Be careful of overhead dripping, when using on overhead areas tilt the
steamplate away from the face and body and regularly empty the steamplate
of any collected condensation.
Always visually check that the hose and steamplate inlet are not blocked
EN
21