UFESA SF Aalborg Manual De Instrucciones página 15

REMOTE CONTROL BATTERY INSTALLATION
1. With the help of a semicircular thin object, turn the battery cover to the unlocked
position as in the below picture:
2. Take out the battery cover.
3. Put the battery (CR2025) into the remote control and place the battery cover on the
battery compartment making sure that the arrowhead icon on the battery cover is alig-
ned with the unlock icon on the remote control. Then, with the help of a semi-circular
thin object, turn the battery cover clockwise to the locked icon.
INSTALLATION
1. Install the fan in the following sequence as in the picture.
Round buckle (Press and hold to separate the fan head from the connecting rod)
2. Please keep the packing items safe for storage.
* Insert the connecting rod into the center hole of the base, insert the gasket, connect
the screw, and tighten it with a screwdriver.
* Insert the connecting seat of the fan head into the connecting seat slot of the con-
necting rod.
OPERATION
Plug the fan into the standard domestic socket to put the product in standby.
Power button:
Push POWER button to switch the fan into operation at low level speed (F1). Push it
again to select standby mode.
15