Idiomas disponibles
Idiomas disponibles
the alarm setting mode. Digits to be set are
flashing. Press
the value. Press
continue to the next setting.
Settings order: Hour> Minute.
4. Finally press the
and exit the Alarm setting mode.
When the alarm sounds, press the
to activate the snooze
sounds again after 5 minutes.
When the alarm sounds, press any other key to stop
the alarm until the set alarm time is reached again.
11. Max / Min temperature and humi-
dity record
1. In normal mode, press the
check the Max
humidity record.
2. When checking the Max/Min record, press
and hold the
24
or
button to change
button to confirm and
button to save the settings
button
function. The alarm
button to
and Min
temperature and
button to clear the record.
12. Channel select
1. In normal mode, press the
Channel 1, Channel 2 , Channel 3 or cycle
display.
2. Hold the
button for approx. 3 seconds to
reset values and search for an RF signal.
NOTICE! Always make sure the channel chosen
on the display unit matches the channel option
chosen on the outdoor sensor.
13. Backlight
When power on the adapter, press the
button to choose the backlight level. It
has 3 levels backlight (dark, medium, light).
When power by batteries, press the
button to turn on the backlight for 7 seconds .
button to select
