Idiomas disponibles
Idiomas disponibles
Alarm mode
In main mode, press ALARM to enter high threshold mode. Press ALARM again to enter lower threshold mode.
When the alert condition is met, the alarm system will sound a loud signal and the
screen. The panel will display a message corresponding to the alert condition. Press any button to turn off the
signal. The flashing alert icon will remain until the condition is no longer met (for example, the temperature
drops below the threshold).
High threshold alarm mode
High indoor temperature alert
High indoor humidity alert
High outdoor temperature alert
High outdoor humidity alert
High absolute pressure alert
High relative pressure alert
High wind speed alert
High wind gusts speed alert
High dew point value alert
High wind chill index alert
High precipitation intensity alert
High daily precipitaion alert
Time alert
Min/max values mode
In the main mode, press MIN/MAX to enter the corresponding mode. All records of maximum and minimum
values of weather parameters are stored here. Press MIN/MAX to toggle between the following entries:
maximum recorded values for the current day, maximum recorded values since last reset, minimum recorded
values for the current day, minimum recorded values since last reset.
Press MIN/MAX to toggle between the maximum/minimum records of different weather values along with the
time and date stamp.
Each maximum/minimum value can be deleted by holding SET for 2 seconds.
History mode
In main mode, press HISTORY. In this mode, you can view recordings in the device memory. If there are no
records, the message HISTORY NONE RECORD will be displayed on the screen. If there are entries, the screen
will display a message, page number (each of which holds 32 entries), date and year.
Using
(Up) and
(Down) you can switch between entries.
between pages.
To completely erase history, hold SET for 2 seconds.
Using memory to store readings
The console is capable of storing up to 3,552 records of historical sensor data in its internal memory. This data
will be retained even if the power is turned off. You can find out how many entries have already been made
using the "Memory Usage" indicator. It is located next to the moon phases and the RF (radio frequency) icon
and is depicted as a circle with marks of 0%, 25%, 50%, 75% (100% indicates the circle is completely full). Once
the memory is fully used, new data replaces the old entries (the circle will remain completely full).
Weather trend indicators
There are arrow symbols next to the indoor/outdoor temperature and humidity segments to indicate weather
trends.
Indicator
Rising
Stable
Falling
Meaning
Rising ≥ 10% in 30 min
< 10% change in 30 min
Falling ≤ 10% in 30 min
Low threshold alarm mode
Low indoor temperature alert
Low indoor humidity alert
Low outdoor temperature alert
Low outdoor humidity alert
Low absolute pressure alert
Low relative pressure alert
Low ind chill index alert
Low dew point value alert
(Left) and
Humidity
15
icon will flash on the
(Right) allow you to switch
Temperature
Rising ≥ 1°C in 30 min
< 1°C change in 30 min
Falling ≤ 1°C in 30 min
