Idiomas disponibles
Idiomas disponibles
Manual control
1. Switching on and off
Press the On/Off button repeatedly to turn the device on or off.
NOTE:
By default, the target temperature is set to 22°C. When you turn on the air
conditioner, the sensor measures the temperature. If the latter is higher than
22°C, the outer part of the air conditioner activates to cool the temperature. If the
temperature is less than 22°C, the device remains off.
2. Choose the mode
Press the Mode button repeatedly to switch between the following modes: Refresh, Fan,
Dehumidify.
3. Set the temperature
In Refresh Mode, press the Increase or Decrease buttons to set the target temperature.
3.1 Choose the unit of measurement
Press the Increase and Decrease buttons simultaneously to switch between the Celsius and
Fahrenheit degree.
4. Setting the speed of the fan
Press the Fan button repeatedly to set a higher or lower fan speed.
5. Timer
1. To access the Timer mode, press the Mode button for about 3 seconds.
2. Press the Increase or Decrease buttons to set the duration from 1 to 24 hours. After
a few moments without entering, the set timer is saved.
3. To disable the timer, press and hold the Mode key for 3 seconds to switch to Timer
mode. Then press the Increase or Decrease buttons to reset the timer.
6. Oscillation function
Press the Standby button and the Fan button simultaneously to activate or deactivate the
Oscillation function.
7. Silent Mode
Press the Silent Mode button repeatedly to switch the device to or from Silent Mode. If
Standby mode is activated, all lights and the screen will turn off after 20 seconds and the
air conditioner will switch to Standby mode. The fan of the inner part continues to operate
at low speed.
EN
13
