Goldstar BG8000ER Manual Del Propietário página 13

Preparation of Chassis
1. Remove the screws which fasten the cabinet
at both sides and at the back.
Use a long screwdriver and installing the
Tip!
screws will be easier.
2. Slide the unit from the cabinet by gripping the
base pan handle and pulling forward while
bracing the cabinet.
3. Cut the window sash seal to the proper
length.
Peel off the backing and attach the Foam-Pe
to the underside of the window sash.
4. Remove the backing from the top Upper Guide
Foam-PE and attach it to the bottom of the
Upper Guide
5. Attach the Upper Guide onto the top of the
cabinet with 3 Type A screws.
6. Insert the Frame Guides into the bottom of
the cabinet.
7. Insert the Frame Curtain into the Upper Guide
and Frame Guides .
8. Fasten the curtains to the unit with 4 Type
A screws.
Foam-Pe
Upper Guide
(Type A)
Screw
Screw
(Type A)
Frame Guides
Installation
Shipping
Screws
Upper Guide
Foam-Pe
Frame
Screw
Guides
(Type A)
Owner's Manual 13