FONESTAR FO-473-TX Manual De Usuario página 4

Transmisor y receptor extensión hdmi
Idiomas disponibles

Idiomas disponibles

BLUE-RAY
EN
HDMI
HDMI
BLUE-RAY
BLUE-RAY
DISTRIBUTOR FUNCTION VIA SWITCH WITH MULTIPLE RECEIVERS FO-472-RX
-
Connect the digital A/V source to the INPUT of the transmitter via HDMI cable.
-
Connect the transmitter output to the switch input using Cat 5e/6 cable.
-
Use Cat 6 cable up to 120 metres to connect the transmitter and receiver with IEEE-568B standard
connection to connect the switch and all receivers FO-474-RX (up to a maximum of 253) with connection
HDMI
according to IEEE-568B standard.
NOTE: no configuration of the FO-474-RXreceivers is necessary.
-
Power the transmitter and receiver with the supplied power adapters.
BLUE-RAY
-
Connect the OUTPUT of the receivers to the TV monitors via HDMI cable.
-
Turn on the digital A/V source and TV monitors.
HDMI
BLUE-RAY
NOTE: Gigabit Ethernet switches are recommended. Do not mix Fast Ethernet switches (100 Mbps) and
Gigabit Ethernet switches (1,000 Mbps) in the same installation.
TROUBLE SHOOTING
PROBLEMA
1
The display is not receiving a
signal
2
The display shows the message
CHECK TX'S INPUT SIGNAL
FO-473-TX
GIGABIT
CAT 6 -120 m
SWITCH
CAT 6 -120 m
FO-473-TX
GIGABIT
FO-473-TX
CAT 6 -120 m
CAT 6 -120 m CAT 6 -120 m
SWITCH
FO-473-TX
GIGABIT
CAT 6 -120 m
SWITCH
FO-473-TX
GIGABIT
-
Press the RESET button on the receiver to restart the
communication.
-
Check that transmitter and receiver are connected to the
power supply and the transmitter data cable output lights
are illuminated.
-
Check the data cable, condition and length. With a Cat6 cable
you can reach up to 120 m in laboratory conditions, this may
vary depending on the components of your installation.
-
Check that the transmitter data cable output lights are
illuminated.
-
Check the HDMI cable between the recorder and the display,
condition and length. Cables longer than 0.7 m are not
recommended.
-
Check the HDMI output settings on the equipment generating
the video signal.
-
Press the RESET button on the transmitter to restart
communication.
-
Check the HDMI cable between the equipment generating
the video signal and the transmitter, condition and length.
Cables longer than 0.7 m are not recommended.
FO-474-RX
GIGABIT
CAT 6 -120 m
253
HDMI
CAT 6 -120 m
FO-474-RX
FO-474-RX
SWITCH
FO-474-RX
GIGABIT
CAT 6 -120 m
253
CAT 6 -120 m
FO-474-RX
SOLUCIÓN
- 4 -
HDMI
HDMI
HD TV
HDMI
HDMI
HDMI
HD TV
HD TV
HD TV
HD TV
HD TV
loading

Este manual también es adecuado para:

Fo-474-rx