FONESTAR FO-473-TX Manual De Usuario página 3

Transmisor y receptor extensión hdmi
Idiomas disponibles

Idiomas disponibles

CONNECTION AND OPERATION
RECOMMENDATIONS
IMPORTANT: to avoid data in the equipment, connect the HDMI cables with the equipment disconnected
from the power supply.
-
It is recommended to use high quality Cat 6 cables with FTP/SFTP shielding. Cables should have shielded
connectors with the cable shielding connected to the connector shield. This improves the reliability of
HDMI extenders, preventing ground loops produced when interconnecting devices (player/receiver and
TV) with different ground references which may cause loss or break-up of the image.
-
Please note that all equipment with HDMI output does not provide the same signal strength and sometimes
the signal may be weak. Use short, high quality HDMI cables to prevent this.
CAT 6 CABLE
A CONNECTOR
RJ-45 (IEEE-568B)
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Shielding
The pinout on both cable's end must follow IEEE-568B.
DIRECT CONNECTION
-
Connect the digital A/V source to the INPUT of the transmitter via HDMI cable.
-
Connect the OUTPUT of the receiver to the TV monitor via HDMI cable.
-
Use Cat 6 cable up to 120 metres to connect transmitter and receiver with IEEE-568B standard connection.
-
Power the transmitter and receiver with the supplied power adapters.
-
Turn on the digital A/V source and the TV monitor.
BLUE-RAY
ETHERNET CONNECTION VIA SWITCH
-
Connect the digital A/V source to the INPUT of the transmitter via HDMI cable.
-
Connect the OUTPUT of the receiver to the TV monitor via HDMI cable.
-
Connect the transmitter output to the switch input using Cat 5e/6 cable.
BLUE-RAY
-
Use 120 meters Cat 6 cable to connect transmitter and receiver with IEEE-568B standard connection.
-
Power the transmitter and receiver with the supplied power adapters.
-
Turn on the digital A/V source and the TV monitor.
BLUE-RAY
STRAIGHT
CABLE
White-Oranje
Oranje
White-Green
Blue
White-Blue
Green
White-Brown
Brown
Shielding screen
HDMI
CAT 6 -120 m
FO-473-TX
CAT 6 -120 m
HDMI
SWITCH
FO-473-TX
GIGABIT
HDMI
CAT 6 -120 m
FO-473-TX
B CONNECTOR
RJ-45 (IEEE-568B)
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Shielding
FO-474-RX
CAT 6 -120 m CAT 6 -120 m
SWITCH
GIGABIT
CAT 6 -120 m
SWITCH
- 3 -
GIGABIT
CAT 6 -120 m
A CONNECTOR
B CONNECTOR
HDMI
HD TV
HDMI
FO-474-RX
HDMI
253
HDMI
EN
PIN 8
PIN 1
HD TV
HD TV
HD TV
loading

Este manual también es adecuado para:

Fo-474-rx