Idiomas disponibles
Idiomas disponibles
Installing water filter
Optional accessory
NOTICE:
For picking up wet dust, make sure that
the water level sensors activate properly.
NOTICE:
Do not use prefilter and damper when
using water filter.
To pick up water or wet dust only, the water filter is more
suitable than the powder filter and prefilter.
When installing the water filter, fit the water filter to the
top plate same as powder filter and prefilter.
Fig.43
NOTE: It is recommended that using water filter
when picking up large amount of water repeatedly.
Otherwise vacuum ability may be reduced in case of
the powder filter and prefilter.
Cleaning the water level sensors
The water level sensors detect liquid when the tank
becomes full with liquid. Clean the water level sensors
with a soft cloth from time to time when changing filters.
Fig.44
► 1. Water level sensor
1
Storage of accessories
Accessories and attachments not in use, such as noz-
zles and pipes can be stored hanging on the hook at the
rear of the cleaner.
1
Fig.45
► 1. Accessory and attachment not in use
Pipes (with an optional stopper installed) can be placed
into the pipe holder when not using the cleaner for a
short time.
Fig.46
► 1. Stopper (optional accessory) 2. Pipe holder
A hose can be wrapped and stored around the housing or han-
dle of the cleaner in large loops. Connect its both ends together
to make loops and hook the loops onto the handle raised up.
Alternatively, keep its root end installed in the hose inlet and
hang the loops on the multi hook with the loose end tied up.
Fig.47
21 ENGLISH
1
2
