CARACTERÍSTICAS DE LA MÁQUINA
1.- OVERALL DIMENSIONS
150cm
59"
140cm
55"
2.- CHARACTERISTICS
2.1.- Generalization
Epoxi painted tubular steel chassis.
Shaft with pulleys mounted on ball bearings.
Electric motor 0.33KW
Approximate power in opeation 450 W
Approximate power at rest 50 KW
Electronic system (sound-timer) at 12 CA
Coin imput counter.
Adjustable function timer.
Figure and base made of polyester amd metallised gelcoat
2.2.- Start up
To start up the apparatus, simply plug it into an earth-connected mains socket. The installation must be protected by a high sensitivity
differential.
When a coin is inserted, the machine will give a typical reception sound.
Once the programmed time has elasped, the apparatus willcome to rest and after a certain time make an attention call (call optional).
2.3.- Adjustement of coin mechanisms
The machine has two coin mechanisms in order to accept a variety of combinations of prices.
In every coin mechanism it's possible to change the number of rides per coin and also the number of coins per ride.
In number 4.3.-Change of parameters will be shown how to modify the programation.
2.4.- Duration of the ride
Possibility to programm the ride time between 1 and 3 minutes. Under paragraph 4.3.- Change of parameters will be shown how to
modify the programation.
2.5.- Call state
The aparatus has luminous and acoustic calls which will be repeated time in time. The last can be cancelled and it's possible to modify
the sound-level. In number 4.3.- Change of parameters will be shown how to modify the programation.
The apparatus is factory-preset to call.
3.- MACHINE DESCRIPTION
3.1.- Generalization
Machine makes a rocking movement, accompanied by typical sound of the figure with additionals sound which ca be activated by
buttons..
The whole mechanism is protected by glassfibre cover which competely insulates it from the exterior.
3.2.- Electricsl section
It's a class I machine, for this it's necessary to plug the machine into an earth-connected main socket.
The machine is fitted with a single-phase motorreducer of 0.33 KW, and has capacited incorporated a 16 µF
250cm
98"
FALGÀS
IMPORTANT
NOTE
The machine must be connected
to and earthed plug
- Do not lift the kiddy ride by
the figure, has this will damaged.
Always lift by the base.
- If flexible power supply-wire from
this machine damaged, it must
be changed by a special flexible
power supply wire H05VV-3g×1.5.
:
.