FALGAS COCHE MAGNUM Manual Del Usuario página 24

TECHNICAL PROBLEMS
CIRCUMSTANCE
Coins are accepted but motor
and sound are not working
Accepts coin and the motor
doesn't work but
Machine operates but not the
audition
Machine operates but not the
lights
The machine doesn't accept
the coin mechanism program
SYMPTOM
Coins are accepted but it
doesn't star
Lights don't work
Coins accepted, but no ride
The display makes a rotative
movement but the motor
doesn't start
When the coin micro is acting
doesn't appear CO on the
display
Motor circuit breaker
disactivated
Motor can't start
The sound doesn't work
Lights doesn't light
Give two rides for the price of
one
For the price for more than a
ride it gives just one z
CAUSE
Sound-timer disconnected or
without power supply
Transformator faulty
"Power" fuse power supply
Microprocessor board faulty
Coin microswitch is set wrong
Board RELAI SOLID is bad
Circuit for motor activating
faulty (Sound-timer)
Coin mechanism micro faulty
Cable sound-timer micro
broken
Micro coin mechanism
disconnected
Excessive consum oh the
motor cause of too much wear
Motor burn out or short-
circuit
Condenser faulty
Potentiometer DIGITAL
LEVELset to minimum
Loudspeaker is bad
Loudspeaker disconnected
Microprocessor board faulty
Lampholders or lamps are badl
Fuse LIGHT of power supply is
bad
Program set wrong
Incorrect use of the coin
incoming C COIN c coin
Program set wrong
Incorrect use of the coin
incoming C COIN c coin
START switch defect
REPAIR
Check power supply and
connections
Substitute it for another with
the same caracteristics
Substitute it for another with
the same values
Consult technical service
Graduate or replace the micro
A technic has to substitute it
Consult technical service
Replace or regulate the switch
Change it
Connect it
Chec ball bearing and change
them if it is necessary
Change it
Reaplace it for another with
the same values
Regulate till position +
Replace
Connect loudspeaker cables
Consult technical service
Replace
Substitute it for another with
the same caracteristics
Program it again
Check coin incoming
Program it again
Check coin incoming
Replace it