Clean
Clean the product each time after using.
The inside of the frying-pan, frying basket and the product are all covered with non-sticking painted coat. Do not use metal kitchen
wares or abrasive cleaning material to do the cleaning, for this will damage the non-sticking painted coat.
1. Pull out the plug from the power socket, let the product cool down.
Notice: take out the frying-pan, thus to make the fat-free fryer cool down more quickly.
2. Use wet cloth to scrub the outside part of the product.
3. Clean the frying-pan or the bottom of the frying-pan with hot water, detergent and non-abrasive sponge, please add hot water
into the frying-pan together with some detergent. Put the frying basket into the frying-pan, and then soak the frying-pan and the
frying basket for 10 minutes.
4. Clean the inside of the product with hot water and non-abrasive sponge.
5. Use cleaning brush to clean the heating components, swept away any remaining food residual.
Guarantee and Services
If your require services or information, or have any doubt, you can communicate with the local Customer Center
If there is no Customer Center near your location, you can communicate with your local dealer.
Malfunction and Treating Method
Problem
The frying-pan does not
work
Food ingredients cooked
by the frying-pan not ripe
enough
Possible Causes
1. The plug of the product is not
inserted into the power socket.
2. You have failed to set the timer
1.Too much food ingredients in
the frying basket
2.The heating temperature
enacted is too low.
3.The cooking time is too short.
Solving Method
1. Insert the plug into the grouded power socket
2. Turn the timer knob to set the right time needed
for cooking, and then turn on the power.
1.Put the food ingredients into the frying basket in
small batches. In small batches, the frying can be
more evenly distributed.
2.Turn the temperature control knob to set the
temperature required(refer to the"Setting" part in
the chapter of "Operating this Product")
3.Turn the timer knob to decide the time for cooking
(refer to the "Setting" part in the chapter of
"Operating this Product")
39