brendz DJERBA Guía De Usuario página 4

GB | Solar outdoor string lights
Read this manual carefully before using the product.
WARNING
• Always follow these instructions to ensure correct installation and operation.
• Do not disassemble or modify yourself. Always have repairs carried out by a qualified
person.
• Do not install near moisture or corrosive substances.
• Avoid exposure of lamps to temperatures above 50°C to prevent melting; keep them
away from direct sunlight, open fire, and extreme heat waves.
• Avoid contact with sharp objects and strong chemicals.
• Light sources are replaceable.
• Do not disturb the internal wiring.
• Use only 1x 18650 Li-Ion 3.7V 2000mAh flattop battery, equivalent to the battery
provided.
• Suitable for outdoor use.
• If the product does not work properly, the light source breaks or gets damaged, do not
use the product. Instead, dispose of it in a safe, environmentally friendly way.
• The product is designed for decorative lighting.
• The product is not a toy; do not give it to children!
• For other problems during use, please contact our customer service.
Assembly
• Check if all the lights are properly tightened and tighten if necessary.
• Place the solar panel in a location with sufficient sunlight, avoiding obstacles such as
trees, buildings, and walls. fig. 1
• There are 3 options for placing the solar panel:
1. Slide the provided spike into the holder to place the panel in the ground. fig. 2
2. Attach the clamp in the holder with the 2 provided small screws to clamp the panel
somewhere. fig. 3
3. Attach the holder with the 2 provided long screws and plugs (Ø 5mm) to the wall. fig. 4
Operation
• For best performance, charge the solar panel in the sun (min. 8 hours) before turning it
ON for the first time (also needed after replacing batteries).
• Slide the ON/OFF switch to ON to turn on the device. fig. 5
• During the day (with sufficient sunlight), the solar panel automatically charges if the
switch is ON.
• When the environment is dark enough, the lights automatically turn on and also
automatically off once it gets light again.
• If the lights do not burn, either the environment is not dark enough or the battery needs
to be charged by the sun.
Tip: If you want to test the lamp in advance, ensure a dark environment or cover the solar panel.
Charging time
About 8 hours at 40.000 lux (Ref.: midday sun in summer = 100.000 lux)
Note: On a sunny, clear day, the LEDs light up longer than on a dark, cloudy day.
Also, make sure the solar panel is clean (free from dirt, leaves, and snow).