Idiomas disponibles
Idiomas disponibles
CAUTION
IF THE BATTERY DOES NOT FIT EASILY INTO
THE BATTERY HOLDER, IT MAY NOT BE
INSTALLED CORRECTLY, WHICH CAN CAUSE
DAMAGE TO THE BATTERY AND/OR THE
PRODUCT.
3.
Make sure that the battery is installed securely.
5.1.5
START THE PRODUCT
1.
Simultaneously push the safety-lock button (1)
and pull the trigger (2).
1
2.
Adjust the speed according to the grass condition
by sliding the speed switch.
English
5.2
5.2.1
When the cutting line becomes short during operation,
bump the trimmer head on a hard, flat surface to
extend more cutting line out. It is recommended to
operate the product on high-speed mode for dense
work areas.
This trimmer is equipped with a string cut-off blade
on the trimmer guard. The string cut-off blade
continuously trims the line to ensure a consistent
and efficient cutting diameter. This will maintain best
performance and keep line long enough to advance
properly.
5.2.2
Note: The cutting diameter of the product is set to 14
in. (35.6 cm), but it can be modified to 16 in. (40.6 cm)
for a larger cutting area or kept at 14 in. (35.6 cm) for
2
longer runtime.
1.
2.
3.
4.
9
OPERATE THE PRODUCT
ADJUST THE LENGTH OF THE CUTTING
LINE
ADJUST THE CUTTING DIAMETER
First, start by removing the battery.
Unscrew the blade screws securing the string cut-
off blade with the hex key.
Turn the string cut-off blade 180°.
Securely tighten the blade screws.
EN
