LIMIT DCM 3 Instrucciones De Uso página 6

POSITIONS (PICTURE 1)
GB
1. NCV sensing end
2. Clamp jaws
3. Hand guard
4. LED indicator
5. Jaw opening trigger
6. Functional dial
7. LCD display
8. Function buttons
9. Signal input jack +
10. COM input jack -
SYMBOLS
Symbol
CAT II
CAT III
BUTTON DESCRIPTION
1. SELECT button
In composite scale, press this button to switch between the corresponding
functions or ranges.
2. REL/ZERO button
(valid for ACV/DCV, DCA, "C/"F and capacitance scales).
Press this button to store the current reading as a reference for future readings.
When the LCD display value is reset to zero, the stored reading will be subtracted
from the future readings. Press this button again to exit the relative value mode.
3. MAX/MIN button
Short press this button to enter the maximum/minimum measurement mode
and long press this button to exit. (Valid for ACV/DCV, ACA/DCA, "C/"F,
resistance and capacitance scales)
4
Description
Caution, possibility of electric shock
Alternating current
Direct current
Equipment protected throughout by DOUBLE INSULATION or
REINFORCED INSULATION
Earth (ground) TERMINAL
Warning or Caution
Applicable to the testing and measuring of circuits connected
directly to utilisation points (socket outlets and similar points)
of the low-voltage MAINS installation.
Applicable to the testing and measuring of circuits connected
to the distribution part of the building's low-voltage MAINS
installation.
1
2
3
4
5
6
CLAMP METER DCM 3
8
7
9
10
Picture 1