Idiomas disponibles
Idiomas disponibles
frequency specified in the Technical Specifications correspond to the mains
supply. Do not use a damaged device. The device must be repaired by a
qualified technician at an authorized service center. Do not allow the power
cord to come into contact with sharp objects or hot surfaces. Do not immerse
the plug, power cord, kettle and/or stand in water or other liquids. Install the
device away from external heat sources or other electrical appliances. Do not
turn on an empty kettle. Do not open the lid of the kettle while the water is
boiling and for two minutes after boiling. Be careful when pouring hot water,
do not tilt the kettle with water too sharply. Make sure the lid is tightly closed
before lifting the kettle. Lift the kettle by the handle only. Do not pour water
below the "MIN" mark and above the "MAX" mark on the inside of the housing.
Use the device only with the supplied stand. The kettle is designed to heat and
boil water only. Use purified water to reduce scale formation. Unplug the kettle
when not in use and before cleaning. Do not use chemical and aggressive
detergents, abrasive pastes, products containing acids and solvents or metal
sponges for cleaning. Do not allow children to use and/or play with the device.
Detailed information can be found in the complete operating manual, available
for download at aeno.com/documents.
LED indication
Indicator
Status
On (white)
Flashing white
Off
On (white)
Flashing white
aeno.com/documents
Description
Boiling water is on
Activating smartphone pairing mode
Boiling water or pairing is
completed/interrupted or the device is
turned off
Temperature maintenance mode is
activated
Activating smartphone pairing mode. The
water temperature in the kettle is higher
than the set temperature
7
