GYS 027510 Traducción De Las Instrucciones Originales página 9

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Translation of the original instructions
NOMAD POWER PRO 700
Remove personal metal items like rings, bracelets, necklaces, etc. When
using the products
Do NOT drop unit. If unit receives a sharp blow or is otherwise da-
maged in any way have it checked by a qualified battery technician.
Do NOT use the unit to jump start a vehicle while charging the internal
battery.
lf this unit is leaking liquid dispose of at proper recycle facility imme-
diately.
Risk of explosion and fire!
A battery being charged can emit explosive gas.
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against short-circuiting.
Class II device (charger booster)
Class III device (booster)
• If the power supply cable is damaged, it must be replaced by the
manufacturer, its service agent or an equally qualified person.
• Under no circumstances should solvents or other aggressive cleaning
agents be used.
• Clean the device's surfaces with a soft, dry cloth.
Regulations :
• The device complies with European Directive.
• The certificate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
Disposal:
• This product should be disposed of at an appropriate recycling facility.
Do not dispose of in domestic waste.
• The battery must be removed from the device before the latter is
discarded.
• The device must absolutely be disconnected from the power supply
network before removing the battery.
• Product contains lithium based battery, at end of product life dispose
of product according to local regulation.
EN
9
loading

Este manual también es adecuado para:

Nomad power pro 700