Idiomas disponibles
Idiomas disponibles
This document is an abridged print version of the
full instructions for use. By scanning the QR code
you gain direct access to the Lidl service website
(www.lidl-service.com), and by entering the
product number (IAN) 384433_2107 you can
look at the full instructions for use and download
them.
WARNING! Adhere to the full instructions for
use and the safety information in order to avoid
personal injuries and damage to property. The
quick guide is an inherent part of this product.
Before using the product familiarise yourself
with all usage and safety information. Keep the
quick guide handy and pass it on along with all
documents when handing over the product to
third parties.
Scope of delivery (fig. A)
1 x stand with support feet (1)
1 x bicycle mount (2)
1 x telescopic rod (3)
1 x front wheel stabiliser (4)
2 x rubber connection (5)
1 x tool tray (6)
1 x clamp (7)
2 x screw (8)
1 x allen key (9)
1 x quick guide
Technical data
Maximum load capacity: 30kg
For bicycle frames: Ø of approx. 25mm – 55mm
Date of manufacture (month/year):
12/2021
Intended use
This bicycle repair stand has been developed for
private use. It allows bicycles to be suspended
and clamped so that repairs can be performed.
Ensure that the floor
is level and position
is stable.
Safety instructions
Risk of injury!
• Read through the instructions for use before
assembly and follow the steps one by one as
described in the instructions.
• WARNING! Do not exceed the maximum
load capacity of 30kg!
• There is risk of injury and of damage to the
product.
• Check all parts of the product regularly. Loose
screws must be tightened and defective parts
replaced in order to avoid damage to the
product.
• Make sure that the socket screws on the upper
tube connector always remain tight.
• WARNING! Set the product up only on a
firm and even surface to prevent the product
from falling over.
• WARNING! No one must sit on the bicycle
once clamped. There is risk of injury
• WARNING! Any use other than for the
intended purpose or any improper use can
lead to endangerment of persons or damage
to the bicycle.
• Avoid any aggressive chemical substances
(e.g. solvents)!
• Discontinue use if damaged.
• When using the product always adhere to
the operating instructions of the pedelec or
bicycle manufacturer.
• Check the product for damage and wear be-
fore each use. The product may only be used
in good order and condition!
Caution! Risk of trapping fingers!
• When unfolding and folding up the repair
stand be sure not to trap your fingers.
• Position the repair stand so that you have
enough space for movement, including when
the bicycle is set up.
Avoiding material damage!
• To prevent damage to the bicycle be careful
not to trap any parts or cabling in the repair
stand.
• Carbon frames and other bicycle frames with
thin walls are extremely sensitive to pressure!
Use appropriate clamping force of the clamp
so as not to damage the frame.
GB/IE
11
