Idiomas disponibles
Idiomas disponibles
10.
Resetting to factory defaults
Proceed as follows to reset the keypad:
Remove the battery (or disconnect the external voltage supply).
Press the 5 key while inserting the battery. You can release the 5 key
after the device emits a confirmation beep.
When the red LED flashes, enter the following reset code: 159357
The keypad sounds twice and the green LED lights up.
The master code has now been reset to 000 and all user codes have been
deleted. Pairing with the lock or cylinder is reset automatically.
11. Maintenance and care
However, as a precautionary measure clean any fingerprints or dirt from the
BKSremote BTC from time to time using a soft, damp (not wet) cloth. Use
clean water with no cleaning additives.
NOTE
The disused device must be disposed of as electro-
nic waste at special waste disposal sites.
Packaging must be disposed of separately.
37
