Idiomas disponibles
Idiomas disponibles
Tris Home app
Note: Due to the updates of the Tris Home application, the images and
information described in this manual may be different from the version you
have installed.
Configure the camera before mounting the feeder in the final location.
Install a micro SD card (max. 128GB) in the camera, connect the Wi-Fi
antenna and turn on the camera by pressing the power button.
Download the application by scanning
the attached QR code:
1. Create an account and log in.
2. In the mobile phone, activate the Location and the Bluetooth function.
3. Press the "+" button to add the camera to the application.
4. Select the "Bird Feeder" - "Bird Feeder" category.
5. Press "Next" in the following interface.
6. If you do not hear the voice prompt "Wait to be configured", press and
hold the Reset key located next to the micro SD card slot.
7. Add the Wi-Fi network password.
8. Position the QR code on the phone screen towards the camera lens at a
distance of 25-30 cm. Wait for the camera configuration.
9. After the camera has been configured, set the camera access password.
10. Set the recording mode: continuous or motion detection.
11. Activate motion detection notifications.
12. Press the "Completed" button to end the camera configuration.
English
6
User manual
