Idiomas disponibles
Idiomas disponibles
Polaris
FREEDOM
PLUS Cordless Robotic Cleaner | Owner's Manual
®
™
2
Figure 24. Undo the Tabs of the Brush
2.
To install the new brush, position the new
brush on the roller with the cleaning blades
facing away from the roller.
3
Figure 25. Install the New Brush
3.
Thread each tab into the slot provided and
gently feed it through until the heel comes out
at the other side of the slot.
4
Figure 26. Pull Tabs Through Each Slot
4.
Use a pair of scissors to cut the tabs 3/4 inch
from the heel so that they are no higher than
the cleaning blade.
5.
Repeat the procedure to install the second
brush.
Figure 27. Cut Tabs
6.5
Replacing Tracks
1.
Check the wear indicator or if the tracks are
loose. Pull on the inside of the old track to
remove the track lip from the front wheel.
Figure 28. Pull the Old Track Over the Wheel
2.
Remove the old track from the front wheel,
then remove track from the rear wheel.
Figure 29. Remove the Old Track
3.
Replace the track on the wheel by positioning
the rib toward the body of the cleaner.
Page 15
