Section 2: Installation - Orbit Landscape LED Light Controller Manual Del Usuario

Buttons
ENTER
MANUAL
CLEAR
STATION To move to different stations: 1, 2, and 3
ARROW (  )
ARROW (  )
TEST ALL
To skip between 1st and 2nd start times
START TIME 1<-->2
( + )
( – )
Dial Position
AUTO
SET CLOCK
SET DAY
HOW OFTEN Set frequency of programmed lighting
START TIME
STOP TIME
MOTION SENSOR Set lighting duration when using a motion sensor
OFF
Function
To confirm a new setting
To manually operate lights
To clear a setting
To skip to the next setting
To go back to the previous setting
To test all stations
To increase a numeric setting
To decrease a numeric setting
Function
Mode to run program
Set current time
Set day of week
Set time to turn on lighting station
Set time to turn off lighting station
Turn all lighting stations off
Section 2: Installation
Required Tools
• Phillips Screwdriver
• Small Phillips Screwdriver
• Wire Strippers
Installation Steps
1 . Select a Location
2 . Mount the Controller
3 . Connect Light Cable to Power Supply Cable
4 . Connect Electrical Wires to Terminal
5 . Connect to Electrical Power
6 . Activate Battery
5