Intended Use; Safety Information - sewerin SPE AutoFlow Manual De Instrucciones

Note:
Performing frequent tests and adjustments with different gases
can be time-consuming and use up a lot of test gas. SEWERIN
recommends:
● Set up separate test sets for the same test procedures.
1.3

Intended use

SPE AutoFlow is suitable for the following uses:
− professional
− industrial
− commercial
The product must only be used for the applications specified in
section 1.2.
The SPE AutoFlow cannot be used for the EX-TEC PM 4 with
attachable test heads or test caps (e.g. HG 4).
Nor can the SPE AutoFlow be used with probes (e.g. carpet
probe and test plate).
Note:
The appropriate specialist knowledge is required for using this
product.
1.4

Safety information

The SPE AutoFlow test set has been manufactured in accord-
ance with all binding legal and safety regulations.
The product is safe to operate when used in accordance with the
instructions provided. However, when handling the product, there
may be risks to persons and property. For this reason, always
observe the following safety information.
14 │ English