EN
C O N T R O L S & D I S P L AY
Note: You can also control these functions using
the VeSync app, as well as additional functions
(see page 13).
Power Button
•
•
•
Mist Level Button
•
•
8
Press to turn the humidifier
on/off.
Press and hold for 5
seconds to pair with the
VeSync app. See the
VeSync in-app instructions
for more information.
Press and hold for 15
seconds to reset the
humidifier. This will restore
the humidifier's default
settings and disconnect
it from Wi-Fi® and the
VeSync app (see page 11).
Press repeatedly to cycle
through mist level settings:
Low, High, and Auto Mode.
(For more details on Auto
Mode, see page 13.)
Press and hold for
3 seconds to turn off
the humidifier display.
This will automatically
change the mist level
setting to Auto Mode.
Wi-Fi Indicator
•
Turns on, off, or blinks to
indicate pairing status.
See the VeSync in-app
instructions for more
information.
No Water Indicator
•
Blinks when there is no
water in the tank. After this
indicator blinks 10 times,
the humidifier will turn off.
Refill the tank and properly
place it on the base to use
your humidifier.
•
Lights up when the
water tank is removed.
Remains on until the
tank is replaced.
Cleaning Reminder
•
After the humidifier has
been in use for a total of
72 hours, the next time you
turn on the humidifier, it will
beep and the display will
read "CL" as a reminder to
clean the humidifier. Clean
the humidifier before using
it again (see page 15).
•
Press any button to reset
the reminder. Unplugging
the humidifier will also
reset the reminder.