Idiomas disponibles
Idiomas disponibles
EN
U S I N G Y O U R S M A R T H U M I D I F I E R
Note: Using the VeSync app allows you to control
your smart humidifier remotely and access additional
functions and features (see page 13).
1.
Plug in the humidifier. Press
your humidifier on. The humidifier will
automatically begin misting on high
for 3 seconds, then change to the low
mist setting.
Note: If there is no water in the tank,
flash 10 times, and the humidifier will turn off. Fill
the water tank (see
2.
Tap
repeatedly to cycle through mist
settings: Auto Mode, Low, and High.
[Figure 3.1]
Note:
The humidifier will not mist in Auto Mode
•
if the humidity level is above 50%. If
you want the humidifier to keep misting,
change the mist setting, or change the
Auto Mode settings in the VeSync app.
For more information about Auto Mode,
•
see page 13.
3.
Rotate the nozzle to adjust the direction
of the mist. [Figure 3.2]
4.
When your room has reached your
preferred humidity level, turn the
humidifier to a lower setting, or turn it
off. A healthy humidity level is between
40% and 50%. [Figure 3.3]
Note: You can also use Auto Mode to keep
the humidity level between 40% and 50%.
5.
Press
Note:
If there is no water in the tank, the
•
humidifier will stop misting,
10 times, and the humidifier will turn off.
Refill the tank and properly place it on
the base to use your humidifier.
If the water tank is removed,
•
remain on until the tank is replaced.
12
Started, page 9).
Getting
to turn your humidifier off.
to turn
will
will flash
will
Figure 3.1
Figure 3.2
Figure 3.3
