Idiomas disponibles
Idiomas disponibles
Bladeless 2-Liter Air Cooling System Use Instructions
EN
Light
Use the light button to turn on the LEDs located on the top of the product.
Remote Control
NOTE: The remote control comes with a magnet placed on the battery compartment door. This allows
you to store it in the remote control slot located on the back of the product.
Remote Control Preparation - Insertion or Replacement of Batteries (AAA not included)
Please follow the instructions below:
To use the remote control, insert the AAA battery.
Always pay attention to the polarity signs (+/-) on the battery and the battery compartment.
Next, push the battery compartment fully into the remote control.
Proper Use of the Remote Control
NOTE: Please handle the remote control with care. Do not expose the remote control to direct sunlight
and keep it away from heat sources.
Cooling blocks
The package contains 2 cooling blocks to be inserted into the water tank. These will help enhance the cooling
effect.
Pay attention to the following points when using the cooling blocks:
Fill the cooling blocks with water only, without exceeding the MAX threshold.
Before placing the blocks, freeze them in the freezer until completely frozen.
Fill the water tank of the cooler up to the MAX mark.
Insert the cooling blocks into the water tank.
Some Tips
Do not place objects on top of the appliance and do not block the air outlet.
Keep the air outlet and inlet grilles clean.
Ensure that there are no operating heat sources in the room.
Never use the appliance in very humid rooms (e.g., laundry rooms).
Do not use the appliance outdoors.
Maintenance and Cleaning
Cleaning the cover grille
To ensure optimal performance, clean the cover grille after every week of use. Before cleaning the appliance,
turn it off, wait a few minutes, and disconnect it from the power source. Use a vacuum cleaner to remove the
accumulated dust from the cover grille. If the cover grille is very dirty, immerse it in warm water and rinse it
several times. Before placing the cover grille back into the appliance, allow it to dry thoroughly.
Caution: Never use the appliance without the cover grille.
Cleaning the structure
After turning off the product, you can clean the main structure with a slightly damp cloth and then dry it with a
dry cloth. Never use benzene, alcohol, or solvents to clean the appliance. Do not spray insecticides or similar
agents on the product.
Water Tank Emptying
It is recommended to empty and clean the water tank frequently to prevent the formation of unpleasant odors
due to water stagnation. Follow the instructions below:
Turn off the appliance and disconnect it from the power outlet.
Remove the water tank but do not take it out completely.
17
