Idiomas disponibles
Idiomas disponibles
Bladeless 2-Liter Air Cooling System Use Instructions
Leave at least a 50 cm space between the appliance and walls or other objects.
Do not manually rotate the fan. The automatic oscillation function should only be activated using the remote
control and the touch screen control panel.
Before using the appliance, ensure that both the air inlet and outlet are free from obstructions. Connect the
appliance to a grounded outlet.
Filling the water tank
Fill the water tank at the bottom of the appliance. Open the water tank cover and pour clean water, checking the
level on the front of the water tank:
MIN mark
The water tank must be filled above the MIN mark to ensure the pump functions properly.
MAX mark
Do not fill the water tank beyond the MAX mark; otherwise, water could penetrate the appliance and damage
electronic components.
Note: Ensure that the water tank is not damp or wet on the outside, and if it is, dry it.
Close the lid again.
Warning: Activating the cooling function with an empty water tray will trigger 2 warning beeps, and
the "cooling" message on the display will start flashing. At this point, refill the tray.
Operation Fig. C
Power Button (ON/OFF)
Press the ON/OFF button to turn the appliance on and off.
Speed Button
The display will appear as follows:
01-03, to select one of the 3 different speeds.
When the display stops flashing, the setting is accepted.
Timer Button
Use the timer button to set a programmed operation time. Each time the timer button is pressed, the operating
time is extended step by step, from 1 hour to 12 hours.
To automatically turn off the appliance, do the following: While the air cooler is in operation, press the timer
button repeatedly until the desired duration in hours is illuminated. The setting is accepted when the desired
duration stops flashing.
Cooling Button
Use the cooling button to activate the function.
Ensure that the water level indicator is above the MIN level.
As soon as the button is pressed, the appliance starts pumping water through the evaporative panel to create
cool and humid air, which is then blown out of the appliance.
Swing Button
Use the swing button to activate the oscillation of the appliance. The display on the control panel lights up.
Press the swing button again to deactivate the function.
NOTE: This function allows for the horizontal distribution of air.
Warning: Do not manually rotate the fan. Oscillation occurs only by activating the swing function.
Ionizer (Ion)
Use the button with the
panel.
to activate the function. This function can only be activated from the touch screen
16
