Idiomas disponibles
Idiomas disponibles
CARE & MAINTENANCE (CONT.)
Cleaning the Pre-Filter
The Washable Pre-Filter should be cleaned
every 2–4 weeks to increase efficiency and
extend the life of your filter. You can set a
reminder in the VeSync app to clean the
pre-filter every 2, 3, or 4 weeks. Clean the
pre-filter using a soft brush or vacuum hose
to remove hair, dust, and large particles.
Optionally, you can wash the pre-filter with
water and a mild detergent to remove dirt
and dust.
Note:
Avoid scrubbing, scraping, or
vigorously brushing the pre-filter. Do not
use abrasive cleaning materials.
To wash the pre-filter:
1.
Turn off the air purifier.
2. Open the front cover
3. Push the pre-filter's tabs downward and
pull to remove the pre-filter.
4. Clean the surface of the pre-filter with a
vacuum. [Figure 2.1]
Figure 2.1
Filter
Washable
Pre-Filter
True HEPA /
Activated
Carbon Filter
When to Clean
Every 2–4 weeks
Do not clean
5. Rinse the pre-filter with water under a
faucet.
6. Wash the pre-filter with mild detergent
and a soft cloth. [Figure 2.2]
7.
Allow the pre-filter to air-dry. Once
completely dry, place the pre-filter back
into the air purifier. [Figure 2.3]
How to Clean
Use a soft cloth or
vacuum hose
Wash with water and
mild detergent
Figure 2.2
Figure 2.3
When to Replace
Does not need to be
replaced
9–12 months
EN
19
