Idiomas disponibles
Idiomas disponibles
6. Install the correct power plug for your market in the
adapter.
Introduction
WARNING:
understand the safety chapter before you
install the product.
To install the product
1. Connect the power adapter to a power outlet.
2. Wait until the LED indicators on the product do not
flash orange.
3. Connect the product to the app Husqvarna Fleet
Services.
To connect to the product with
a) Refer to
Husqvarna Fleet Services on page 6 .
b) Obey the instructions in the app Husqvarna Fleet
Services.
To connect to the product with
Husqvarna Fleet Services
Note:
Radio transmission by
enabled on the first time of connection to the mains
socket, and stay on after that.
6
Installation
Read and
®
Bluetooth
will be
1. Download the iOS or Android app Husqvarna Fleet
Services.
2. Go to https://fleetservices.husqvarna.com for more
information.
To install the product on a wall
Note:
Since walls can be of different materials, screws
are not included.
1. Disconnect the product from the power supply.
2. Select a location in range of the connected
Husqvarna products.
3. Install the product on the wall with 4 screws.
a) Put the product with the antenna up and the
connectors down.
b) Use M5 screws and tighten to 0.5 Nm.
1862 - 002 - 07.03.2024
