Husqvarna HCM 500 Manual De Usuario página 5

• Use only original Husqvarna spare parts and
accessories.
To assemble the product
The hub has a built-in antenna for
communication. For better signal strength, we
recommend to install the external antenna.
1. Remove the nut and the washer from the antenna.
2. To install the antenna horizontally, do these steps:
a) Put the antenna wires through the hole (A) in the
antenna bracket.
b) Install and tighten the nut.
1862 - 002 - 07.03.2024
Assembly
®
Bluetooth
A
c) Put the antenna wires through the hole (B) in the
antenna bracket.
3. To install the antenna vertically, do these steps:
a) Do not use hole (A) and put the antenna wires
directly through hole (B).
b) Install and tighten the nut.
4. Connect the antenna wires to the related connectors
at the front of the hub.
5. Connect the power cord to the connector (A).
A
B
5