Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1 . C heck that the control knob (C) for the
gas supply system is turned to the "OFF"
position before starting any assembly.
2 . R emove door from body (B) and place
propane gas tank (not included) into the
metal stand inside of the body (B).
B
3 . T urn the cylinder valve on the tank clockwise
to close the propane tank. Attach the
preassembled regulator from the body
(B) to the cylinder valve by turning the
regulator coupling nut clockwise. Make
sure it is fastened securely and tighten
connections by hand only.
C
WARNING
D
Please inspect the rubber O ring in the
propane tank valve to ensure it is not
worn before attaching regulator. Worn
rubber O ring can cause leaks, explosions
and serious injury by propane tank.
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
4 . O nce the tank is attached to the regulator,
make sure the propane gas tank sits on the
metal stand inside body (B) completely.
Turn the preassembled wing screw on the
outer part of metal stand clockwise to
secure the propane gas tank tightly.
9
PRESSURE
RELIEF VALVE
CYLINDER VALVE
RUBBER O-RING
BLEED-OFF
VALVE
turn clockwise
to reseal
