Black and Decker BD17208 Manual De Instrucciones página 7

WARNING
a qualified professional. This unit should be
inspected annually and cleaned regularly.
More frequent cleaning may be required as
necessary. It is imperative that the control
compartment, burners and circulating
airways of the appliance are kept clean.
• Inspect all elements of this heating unit
before each use. If there is damage, the
burner must be replaced.
• Be aware of the hazards of high
temperatures and stay away from the unit to
avoid any burns or injury.
• The gas supply tank should be constructed
and marked with the specifications for the
LP gas tanks of the U.S. Department of
Transportation or the National Standard
of Canada CAN/CSA-B339, LP gas tanks,
spheres and tubes for Transportation of
Dangerous Goods; and Commission.
• The LP gas tank must have a listed overfilling
prevention device and a QCCI or Type I,
(CGA791) LP gas tank connection.
• This heating appliance should not be used on
plastic or artificial wood decks.
• Children and adults should be alerted to the
hazards of high surface temperatures and
should stay away to avoid burns or clothing
ignition.
• Young children should be carefully
supervised when they are in the area of the
appliance.
• Clothing or other flammable materials
should not be hung from appliance or
placed on, in, or near the appliance.
• Any guard or other protective device
removed for servicing the appliance
shall be replaced prior to operating the
appliance.
• Installation and repair should be done by
a qualified service person. The appliance
should be inspected before use and at least
annually by a qualified service person.
More frequent cleaning may be required as
necessary. It is imperative that the control
compartment, burners, and circulation air
passageways of the appliance are kept
clean.
WARNING
IF APPLICABLE:
• Allow heating item to cool completely before
placing on lid.
• DO NOT use heating item while lid is
installed. Always remove the lid while heating
item is in use.
Only use the regulator and hose assembly
provided with this unit. Replacement parts must
be supplied directly by manufacturer.
Inspect the burner before use of this unit. If
the burner shows any kind of damage, do not
operate the appliance. For assistance with
safety information continued
repair or replacement of the burner or any
other parts, call manufacturer at 1.877.447.4768.
NOTE: You must follow all steps to properly assemble this heating ite
assemble without proper tools.
WARNING
IF APPLICABLE:
• Allow heating item to cool completely before placing on lid.
• You must follow all steps to properly
• DO NOT use heating item while lid is installed. Always remove the
assemble this heating item. Make sure the
gas valve is turned "OFF" before assembling.
Only use the regulator and hose assembly provided with this unit. Re
Do NOT attempt to assemble without proper
Inspect the burner before use of this unit. If the burner shows any kin
tools.
burner or any other parts, calls manufacturer at 1.877.447.4768.
• Combustible material should not be within
NOTE: You must follow all steps to properly assemble this heati
60 in of the top of the unit, or within 48 in
to assemble without proper tools.
around the entire unit. Combustible materials
could be and are not limited to any items
that may catch fire such as dry vegetation,
wood, branches, leaves, plants, buildings,
structures, fabrics, clothing, sawdust, all
chemicals, and all flammable liquids.
60
7
(152.4 cm)
Note: Combustible mater
Combustible materials co
branches, leaves, plants,