Idiomas disponibles
Idiomas disponibles
WARNING
Only connect the device to an
electrical connection which has been set up by a quali-
fied electrician as per IEC 60364-1.
supply cable with mains plug for damage before opera-
tion each time. Do not put the device into operation with
a damaged power supply cable. Have a damaged pow-
er supply cable replaced immediately by the authorised
customer service / qualified electrician.
age the power supply and extension cable by running
over it, crushing or yanking it or similar. Protect the pow-
er supply cable from heat, oil and sharp edges.
CAUTION
In case of longer breaks in opera-
tion and after use, switch off the device at the main
switch / device switch and pull the mains plug. Switch
off the device and unplug the mains plug before per-
forming cleaning/maintenance.
vice, pull the power supply cable fully out of the device.
If the cable is wrapped around the cable hook, you must
undo it completely.
Do not carry/transport the device
using the power supply cable.
plug out the socket using the power supply cable.
Operation
DANGER
Operation in explosive atmospheres is prohibited.
Risk of explosion
Never use the device to vacuum up combustible
gases, liquids or dusts.
Never use the device to vacuum up reactive metal
dusts (e.g. aluminium, magnesium, zinc).
Never use the device to vacuum up undiluted brine
or acids.
Never use the device to vacuum up any burning or
smouldering objects/matter.
These substances can corrode the materials in use
on the device.
WARNING
Risk of injury. Do not use the nozzle and suction pipe
at head height.
CAUTION
Never leave the device unsupervised while it is in op-
eration.
Accidents or damage due to the device falling over.
Before all actions with or on the device, you must
make sure that it is stable.
ATTENTION
Protect the device from extreme weather conditions,
moisture and heat.
Never use the device without a filter, this can lead to
device damage.
Care and service
WARNING
Switch off the device immediately and remove the
mains plug before performing any care and service
work.
CAUTION
Have repair work and work on electrical components
carried out by the authorised customer service only.
ATTENTION
Do not use scouring agents, glass or multi-purpose
cleaner for cleaning.
Check the power
Do not dam-
When using the de-
Do not pull the mains
Transport
CAUTION
In order to prevent accidents or injuries, you must ob-
serve the weight of the device when transporting it.
Description of the device
Depending on the model selected, there are differences
in the equipment. The specific equipment is described
on the device packaging.
For the illustrations, refer to the graphics page.
Illustration A
Steering roller
1
Suction connection
2
Suction head
3
ON/OFF switch
4
Carry handle
5
Accessories storage
6
Container closure
7
Container
8
Blowing connection
9
Suction hose
10
Suction pipes
11
Crevice nozzle
12
Upholstery nozzle
13
Floor nozzle
14
Textile filter
15
Filter bag
16
Installing the steering rollers
1. Install the steering rollers before initial startup.
Illustration B
Illustration C
Illustration D
Illustration E
Initial startup
Install the textile filter and filter bag
1. Release and remove the suction head.
2. Install the textile filter and ensure correct seating.
Illustration F
3. Fully unfold the filter bag.
4. Press the filter bag with the plastic ring on the device
connection with your fingers until it clicks into place.
Illustration G
5. Fit and lock the suction head.
Illustration H
Accessory application
1. Connect the suction hose.
Illustration I
2. Connect the suction hose to the suction pipes.
Illustration J
3. Install the nozzles.
Connect the crevice nozzle to the suction pipes.
This is used for cleaning joints, grooves between
doors and windows, tiny slits, etc.
Illustration K
