Idiomas disponibles
Idiomas disponibles
4. Traffic light indicator in the display
The bars on the left-hand edge of the traffic light display AK show you
the range within which the indicated blood pressure value lies.
Depending on the height of the bar, the readout value is either within
the normal (white), borderline (gray) or danger (dark gray) range. The
classification corresponds to the 6 ranges in the Table as defined by
the WHO, as described in «Section 1.»
5. Data memory
At the end of each measurement, this device automatically stores the
result, including date and time.
Viewing the stored values
Press the M-button 5 briefly, when the device is switched off. The
display first shows «M» AL, and «A»which stands for the average of
all stored values.
Pressing the M-button again displays the previous value. Pressing
the M-button repeatedly enables you to move from one stored value
to another.
Memory full
Pay attention that the maximum memory capacity of 60
memories is not exceeded. When the 60 memory is full, the
oldest value is automatically overwritten with the 61.
22
value. Values should be evaluated by a doctor before the
memory capacity is reached – otherwise data will be lost.
Clearing all values
If you are sure that you want to permanently remove all stored
values, hold down the M-button (the device must have been switched
off beforehand) until «CL ALL» appears and then release the button.
To permanently clear the memory, press the time button while «CL
ALL» is flashing. Individual values cannot be cleared.
Cancel deletion: press ON/OFF button 1 while «CL ALL»
is flashing.
How not to store a reading
As soon as the reading is displayed press and hold the ON/OFF
button 1 until «M» AL is flashing. Confirm to delete the reading by
pressing the M-button 5.
It is not possible to delete individual readings later.
6. Battery indicator and battery change
Low battery
When the batteries are approximately ¾ empty the battery symbol AO
will flash as soon as the device is switched on (partly filled battery
displayed). Although the device will continue to measure reliably, you
should obtain replacement batteries.
