Worx HYDROSHOT WG620E Serie Manual Original página 15

30. FIXING NAIL
SPRAY NOZZLE* (WA1843, NOT TO BE USED
31.
WITH ALCOHOL)
*Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type Designation WG620E WG620E.X (620-649
- designation of machinery, representative of
battery-powered washer)
Voltage
Max. pressure
Rated pressure
Max water flow rate
Max. inlet water pressure
Suction height
Machine weight (Bare
Tool)
** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal
voltage is 18 volts.
***X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
SUGGESTED BATTERIES AND
CHARGERS
Category
20V Battery
20V Charger
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
2 in 1: Portable Power Cleaner/Water Sprayer
WG620E WG620E.X***
20 V Max**
2.4Mpa (24bar)
2.2Mpa (22bar)
120L/h
0.6Mpa (6bar)
Max. 1.5m
1.3kg
Type Capacity
WA3551 2.0 Ah
WA3551.1 2.0 Ah
WA3550 1.5 Ah
WA3550.1 1.5 Ah
WA3553 4.0 Ah
WA3641 6.0 Ah
WA3880 2.0 A
WA3760 0.4 A
WA3867 6.0 A
the accessory packaging for further details. Store
personnel can assist you and offer advice.
NOISE DATA
A weighted sound pressure
A weighted sound power
K
pA
Wear ear protection
VIBRATION INFORMATION
Typical weighted vibration
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ from the
declared value depending on the ways in which the
tool is used dependant on the following examples
and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring
it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration exposure risk.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
L : 73.8 dB(A)
pA
L : 84.8 dB(A)
wA
2.35 dB(A)
a = 1.339 m/s
2
h
K= 1.5 m/s
2
EN
15