Idiomas disponibles
Idiomas disponibles
setting the desired value, the display will return the current pressure
value. Press the start/stop button (26) to start the inflation process, the
pressure shown on the display will now increase to the set pressure, the
inflation process will end automatically as soon as the set target pressure
is reached, it is always possible to end the process manually by pressing
the start/stop button (26).
9. LED signalling ring
The panel illumination changes when the pressure (bar) is:
• <2.1 - the colour yellow is displayed
• 2.1≤&≤2.6 - the colour green is displayed
• 2.6<&≤3.1 - the colour orange is displayed
• >3.1 - the colour red is displayed
03. CONSERVATION
1. Always disconnect the 12V plug from the cigarette lighter socket
before carrying out any maintenance work.
2. Regularly clean the compressor housing with a soft sponge/rag
preferably after each use.
3. Ensure that the vents are always free of dust and dirt.
4. Remove very stubborn dirt with a dampened soft soapy cloth. Do not
use any solvents such as petrol, alcohol, ammonia etc. Chemicals will
damage the synthetic components.
04. TECHNICAL SPECIFICATIONS
Power supply: 12V DC cigarette lighter socket / Battery: Li-Ion 4500mAh
Power: 120W
Nominal current: 10A (Max. 15A)
Maximum pressure: 10.3bar/150psi/10.5kg/cm²/999kPa
Air flow: 25 l/min
Power cable: 4m. terminated with cigarette lighter plug
Battery charging time: ~2h
Battery operating time: ~10min
Air cable: 60cm
Connector: car valve + extra tips
Auto STOP
Max. continuous running time: 15min
Metal cylinder and piston: 22mm
Electronic manometer with LED display
Intelligent colour indication
Input: USB-C 5V 2A
Volume: ≤73dB
Dimensions: 98x98x133mm
12
