Idiomas disponibles
Idiomas disponibles
MODEL: 6961
CLEANING YoUR APPLIANCE
Clean your appliance after each use, after it is cool to the touch.
• DO NOT use abrasive pad on areas with graphics.
• If a bristle brush is used to clean any of the cooking surfaces,
ensure no loose bristles remain on cooking surfaces prior
to cooking.
Grease build up can cause a fire. Clean any part of the
appliance that gets hot and experiences grease build up after
each use.
PLASTIC PARTS & PAINTED SURFACES:
Wash with warm soapy water and wipe dry with a non-abra-
sive cloth.
NOTICE
DO NOT use Citrisol, abrasive cleaners, or a concentrated
cleaner on plastic parts. This may result in damage to and
failure of parts.
FOR EVERY SURFACE
The Blackstone degreaser
and Cleaning Spray is gentle
enough to clean every surface
of your appliance. Use it on the
cooking surface, the appliance
frame, or anywhere that experi-
ences a build up of grease.
APPLIANCE STORAGE
DO NOT move the appliance when in use. Allow the appliance
to cool to 115°F (45°C) before moving or storing.
COVER FIT GUIDE
Always cover your appliance when stored outdoors.
To find a cover that will fit your appliance, visit
BlackstoneProducts.com/support.
BLACKSTONEPRODUCTS.COM/SUPPORT
WARNING
WARNING
USING YoUR BLACKSToNE
CLEANING YOUR PIZZA STONE
BEFORE FIRST AND SUBSEQUENT USES:
Set your oven to HIGH for 10~15 min to burn off residue.
STEP 01
Flip stone over when cool.
STEP 02
NOTICE
DO NOT use soap on the cooking stone. This will leave a soap
taste in food.
CLEANING YOUR OVEN INTERIOR
Apply a strong solution of detergent and water, or use an oven
cleaner with scrub brush on insides of oven lid and floor. Rinse and
allow to completely air dry.
Reference the Troubleshooting chapter for instructions on cleaning
the burner.
dISCoNNECT THE LPG CYLINdER
1 LB (453 G)
Ensure that the control knob(s) are turned to OFF.
STEP 01
Once the appliance has cooled, disconnect the regulator
STEP 02
from the gas line by unscrewing the collar.
Unscrew the LPG cylinder from the regulator.
STEP 03
Place dust cap on LPG cylinder valve outlet whenever
STEP 04
cylinder is not in use.
only install the type of dust cap on cylinder valve outlet that is provided
only install the type of dust cap on cylinder valve outlet that is provided
with the cylinder valve. other types of caps or plugs may result in leakage of
with the cylinder valve. other types of caps or plugs may result in leakage of
propane.
propane.
STORING LPG CYLINDERS
• DO NOT store a spare LPG cylinder under or near this
appliance.
• DO NOT fill an LPG cylinder beyond 80% full.
If the information above is not followed exactly, a fire causing
death or serious injury may occur.
• The LPG cylinder must be disconnected when the appliance is
not in use.
• Only store the appliance indoors if the LPG cylinder is disconnected
and removed from the appliance.
| OWNER'S MANUAL
WARNING
11
