Charging External Devices - Dörr SL-10600 Manual De Instrucciones

05.3 LED CAPACITY INDICATOR
Press the On/O button (5) to show the remaining power of the Powerbank.
The blue LED charging and capacity indicator (3) displays remaining power as follows:
1 LED
2 LEDs
3 LEDs
4 LEDs

05.4 CHARGING EXTERNAL DEVICES

Connect the device you want to charge, with the USB port (7) using
•
the USB cable (*).
(*) For Apple® series products please use the original USB cord of your Apple® device.
Press the On/Off button (5) once. The LED charging and capacity indicator
•
(3) lights up blue and the charging process starts.
After charging is completed, turn off the Powerbank pressing the On/Off
•
button (5) twice in quick succession. Disconnect the charged device from
the Powerbank.
05.5 LED LIGHT FUNCTION/LIGHTING MODES
Press the On/O button (5) for about 3 seconds and the LED lights (8) on rear side of Powerbank will light up.
To change the lighting mode, press the On/O button (5) in quick succession.
Lighting Mode Light function
1 All LEDs light up constantly
2 White/orange fl ashing
3 ··· – – – ··· white fl ashing
(*) CAUTION:
The SL-10600 does not replace the use of a warning triangle when having a car breakdown. While driving the
SL-10600 light does not replace the vehicle light and it should not be used an additional illumination.
To turn o the LED light, press the On/O button (5) for about 3 seconds.
10 – 40% capacity
40 – 65% capacity
65 – 85% capacity
85 – 100% capacity
Purpose
Working light, camping light
Warning light (*)
SOS emergency light
11