Cardin Elettronica Morpheus Serie Manual Del Usuario página 13

Remarks
These instructions are aimed at professionally qualified "installers of electrical equipment" and must respect
the local standards and regulations in force. The use and installation of these appliances must rigorously
respect the indications supplied by the manufacturer.
Attention! This symbol indicates that once the products life-span has expired it must be
disposed of separately from other rubbish. The user is therefore obliged to either take the
product to a suitable differential collection site for electronic and electrical goods or to send
it back to the manufacturer if the intention is to replace it with a new equivalent version of the
same product. Suitable differential collection, environmental friendly treatment and disposal
contributes to avoiding negative effects on the ambient and consequently health as well as favouring
the recycling of materials. Illicitly disposing of this product by the owner is punishable by law and will be
dealt with according to the laws and standards of the individual member nation.
EC conformity declaration
The constructor declares that the Morpheus radio control system complies with the provisions of the EC
directive 99/05/CE (R&TTE) and that the following standards and/or technical specifications have been applied:
- EN 60950-1 = 2004; EN 300220-2 = 2010; EN 301489-3 = 2001; EN 301489-1 = 2008.
Description
The Morpheus radio control system in "FM" consists of one or more mobile transceivers and one or more
stationary transceivers which can be combined to meet the specific needs of the system.
The Morpheus system uses a highly reliable encoding system (2
dynamic codes. The codes in the mobile units are transferred during the memorization stage in to the non-
volatile memory of the fixed unit; a maximum of 1000 different codes may be memorized.
The two LEDs (blue and orange) located on the mobile units indicate the status of the contact (closed/open)
corresponding to the activated channel, while the buzzer indicates the success or failure of the communication
between the two units (stationary or mobile).
combinations) guaranteed by the use of
128
13